R5_x279_000_0004_tow_yo_7CTMDerive_EOS80_1m_bin_up eng UTF8 dataset service Michael S. Williamson Texas A&M University-Corpus Christi +1 361-825-2048 HRI 213E Corpus Christi TX 78412 USA michael.williamson@tamucc.edu pointOfContact 2026-05-11 ISO 19115-2 Geographic Information - Metadata Part 2 Extensions for Imagery and Gridded Data ISO 19115-2:2009(E) 4 column row vertical temporal Profile - R5.x279.000.0004 - tow_yo_7CTMDerive_EOS80_1m_bin_up - UnknownN, 0.00W - 2016-09-20 2020-12-14 creation 2020-12-14 issued erddap.griidc.org R5_x279_000_0004_tow_yo_7CTMDerive_EOS80_1m_bin_up Kurt Polzin TAMU kpolzin@whoi.edu https://data.gulfresearchinitiative.org/data/R5.x279.000:0004 information web browser Background Information Background information from the source information originator Zhankun Wang zhankun.wang@noaa.gov contributor This dataset contains Conductivity, Temperature, Depth (CTD) data collected during the September 2016 GoMix I Cruise. The experimental site is on the continental slope of the northern Gulf of Mexico, next to the Deepwater Horizon Spill site. During the cruise there were 3 meridional and 18 zonal sections of CTD tow-yo's. For each tow-yo, 8 to 46 vertical profiles were collected depending on the time length of the tow-yo. The rest were CTD stations. The CTD used was a SEA-BIRD 911plus/917plus double sensors. Data from the CTD were acquired at 24 hz. The CTD data were acquired by an SBE Model 11 plus CTD Deck Unit providing demodulated data to a computer in the engineer room running SeaBird software. After the cruise, the raw CTD data were run through the SeaBird data conversion software (SeaBird, Version 7.25.0.151). Data Conversion performs the first step in data processing, converting the raw CTD and auxiliary sensor data (typically frequencies and voltages) to engineering units. Data Conversion uses the instrument configuration file, which defines sensors, sensor channels, and calibration coefficients, to convert raw data to engineering units. The conductivity was advanced approximately 0.073 seconds relative to pressure for CTD alignment. No low pass filter was applied to the data to reserve the high resolution signals. The practical salinity was calculated using DERIVE sal.cfg and the abslote salinity, density and potential temperature was calculated using DERIVE EOS80. The high resolution data are available both in ASCII format and matlab format. 1-m bin averaged files are created separately to generate the bin-averaged profiles and saved as matlab files. Kurt Polzin TAMU kpolzin@whoi.edu https://data.gulfresearchinitiative.org/data/R5.x279.000:0004 information web browser Background Information Background information from the source information pointOfContact 2016-09-19 2016-09-26 7ctmderive 911plus 917plus absolute afl altimeter attenuation bad beam bin bird cast casts cat cdom chelsea chelsea/seatech chemistry chlorophyll chloropyhll coefficient collected color colored concentration conductivity crs cruise ctd data density department descent dissolved dissolved o2 during earth eco eco-afl/fl elapsed electrical eos80 flag fluorescence fluorowetlabcdom flux gom gomix good gulf gulf of mexico hydrography identifier instrument instrument1 instrument11 instrument12 instrument13 instrument14 instrument2 instrument3 instrument4 instrument5 instrument6 instrument7 instrument8 instrument9 labs labscstar marine mask mass matter mexico mississippi mole molecular northern nutrients O2 ocean ocean color oceanographic oceans optical optical properties optics organic oxygen platform point potential practical pressure profile properties quality qualityMask2Up qualityMaskUp radiance radiative rate raw salinity science sea sea-bird seabird seatech seawater second sensor sonde southern spar sur temperature tow tow-yos transmission transmissometer university volume water wet yos theme Earth Science > Oceans > Salinity/Density > Salinity Earth Science > Oceans > Salinity/Density > Conductivity Earth Science > Oceans > Ocean Temperature > Water Temperature Earth Science > Oceans > Ocean Temperature > Potential Temperature Earth Science > Oceans > Ocean Pressure > Water Pressure Earth Science > Oceans > Ocean Optics > Radiance Earth Science > Oceans > Ocean Optics > Attenuation/Transmission Earth Science > Oceans > Ocean Chemistry > Oxygen Earth Science > Oceans > Ocean Chemistry > Chlorophyll theme GCMD Science Keywords Understanding How the Complex Topography of the Deepwater Gulf of Mexico Influences Water-column Mixing Processes and the Vertical and Horizontal Distribution of Oil and Gas after a Blowout project time time latitude longitude sea_water_pressure depth sea_water_temperature sea_water_temperature sea_water_practical_salinity sea_water_practical_salinity mole_concentration_of_dissolved_molecular_oxygen_in_sea_water mole_concentration_of_dissolved_molecular_oxygen_in_sea_water mass_concentration_of_chlorophyll_a_in_sea_water cdom volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water sea_water_absolute_salinity sea_water_absolute_salinity depth sea_water_potential_temperature sea_water_potential_temperature quality_flag quality_flag sea_water_electrical_conductivity sea_water_electrical_conductivity theme CF Standard Name Table v72 These data may be redistributed and used without restriction. Understanding How the Complex Topography of the Deepwater Gulf of Mexico Influences Water-column Mixing Processes and the Vertical and Horizontal Distribution of Oil and Gas after a Blowout largerWorkCitation project Unidata Common Data Model Profile largerWorkCitation project eng geoscientificInformation 1 -89.18296 -89.18099 28.37538 28.375998 seconds 2016-09-20T06:48:40Z 2016-09-20T06:48:40Z -715.5 -525.5 Profile - R5.x279.000.0004 - tow_yo_7CTMDerive_EOS80_1m_bin_up - UnknownN, 0.00W - 2016-09-20 2020-12-14 creation 2020-12-14 issued Kurt Polzin TAMU kpolzin@whoi.edu https://data.gulfresearchinitiative.org/data/R5.x279.000:0004 information web browser Background Information Background information from the source information originator Zhankun Wang zhankun.wang@noaa.gov contributor This dataset contains Conductivity, Temperature, Depth (CTD) data collected during the September 2016 GoMix I Cruise. The experimental site is on the continental slope of the northern Gulf of Mexico, next to the Deepwater Horizon Spill site. During the cruise there were 3 meridional and 18 zonal sections of CTD tow-yo's. For each tow-yo, 8 to 46 vertical profiles were collected depending on the time length of the tow-yo. The rest were CTD stations. The CTD used was a SEA-BIRD 911plus/917plus double sensors. Data from the CTD were acquired at 24 hz. The CTD data were acquired by an SBE Model 11 plus CTD Deck Unit providing demodulated data to a computer in the engineer room running SeaBird software. After the cruise, the raw CTD data were run through the SeaBird data conversion software (SeaBird, Version 7.25.0.151). Data Conversion performs the first step in data processing, converting the raw CTD and auxiliary sensor data (typically frequencies and voltages) to engineering units. Data Conversion uses the instrument configuration file, which defines sensors, sensor channels, and calibration coefficients, to convert raw data to engineering units. The conductivity was advanced approximately 0.073 seconds relative to pressure for CTD alignment. No low pass filter was applied to the data to reserve the high resolution signals. The practical salinity was calculated using DERIVE sal.cfg and the abslote salinity, density and potential temperature was calculated using DERIVE EOS80. The high resolution data are available both in ASCII format and matlab format. 1-m bin averaged files are created separately to generate the bin-averaged profiles and saved as matlab files. ERDDAP tabledap 1 -89.18296 -89.18099 28.37538 28.375998 seconds 2016-09-20T06:48:40Z 2016-09-20T06:48:40Z -715.5 -525.5 tight ERDDAPtabledapDatasetQueryAndAccess https://erddap.griidc.org/erddap/tabledap/R5_x279_000_0004_tow_yo_7CTMDerive_EOS80_1m_bin_up ERDDAP:tabledap ERDDAP-tabledap ERDDAP's tabledap service (a flavor of OPeNDAP) for tabular (sequence) data. Add different extensions (e.g., .html, .graph, .das, .dds) to the base URL for different purposes. download Profile - R5.x279.000.0004 - tow_yo_7CTMDerive_EOS80_1m_bin_up - UnknownN, 0.00W - 2016-09-20 2020-12-14 creation 2020-12-14 issued Kurt Polzin TAMU kpolzin@whoi.edu https://data.gulfresearchinitiative.org/data/R5.x279.000:0004 information web browser Background Information Background information from the source information originator Zhankun Wang zhankun.wang@noaa.gov contributor This dataset contains Conductivity, Temperature, Depth (CTD) data collected during the September 2016 GoMix I Cruise. The experimental site is on the continental slope of the northern Gulf of Mexico, next to the Deepwater Horizon Spill site. During the cruise there were 3 meridional and 18 zonal sections of CTD tow-yo's. For each tow-yo, 8 to 46 vertical profiles were collected depending on the time length of the tow-yo. The rest were CTD stations. The CTD used was a SEA-BIRD 911plus/917plus double sensors. Data from the CTD were acquired at 24 hz. The CTD data were acquired by an SBE Model 11 plus CTD Deck Unit providing demodulated data to a computer in the engineer room running SeaBird software. After the cruise, the raw CTD data were run through the SeaBird data conversion software (SeaBird, Version 7.25.0.151). Data Conversion performs the first step in data processing, converting the raw CTD and auxiliary sensor data (typically frequencies and voltages) to engineering units. Data Conversion uses the instrument configuration file, which defines sensors, sensor channels, and calibration coefficients, to convert raw data to engineering units. The conductivity was advanced approximately 0.073 seconds relative to pressure for CTD alignment. No low pass filter was applied to the data to reserve the high resolution signals. The practical salinity was calculated using DERIVE sal.cfg and the abslote salinity, density and potential temperature was calculated using DERIVE EOS80. The high resolution data are available both in ASCII format and matlab format. 1-m bin averaged files are created separately to generate the bin-averaged profiles and saved as matlab files. OPeNDAP 1 -89.18296 -89.18099 28.37538 28.375998 seconds 2016-09-20T06:48:40Z 2016-09-20T06:48:40Z -715.5 -525.5 tight OPeNDAPDatasetQueryAndAccess https://erddap.griidc.org/erddap/tabledap/R5_x279_000_0004_tow_yo_7CTMDerive_EOS80_1m_bin_up OPeNDAP:OPeNDAP OPeNDAP An OPeNDAP service for tabular (sequence) data. Add different extensions (e.g., .html, .das, .dds) to the base URL for different purposes. download Profile - R5.x279.000.0004 - tow_yo_7CTMDerive_EOS80_1m_bin_up - UnknownN, 0.00W - 2016-09-20 2020-12-14 creation 2020-12-14 issued Kurt Polzin TAMU kpolzin@whoi.edu https://data.gulfresearchinitiative.org/data/R5.x279.000:0004 information web browser Background Information Background information from the source information originator Zhankun Wang zhankun.wang@noaa.gov contributor This dataset contains Conductivity, Temperature, Depth (CTD) data collected during the September 2016 GoMix I Cruise. The experimental site is on the continental slope of the northern Gulf of Mexico, next to the Deepwater Horizon Spill site. During the cruise there were 3 meridional and 18 zonal sections of CTD tow-yo's. For each tow-yo, 8 to 46 vertical profiles were collected depending on the time length of the tow-yo. The rest were CTD stations. The CTD used was a SEA-BIRD 911plus/917plus double sensors. Data from the CTD were acquired at 24 hz. The CTD data were acquired by an SBE Model 11 plus CTD Deck Unit providing demodulated data to a computer in the engineer room running SeaBird software. After the cruise, the raw CTD data were run through the SeaBird data conversion software (SeaBird, Version 7.25.0.151). Data Conversion performs the first step in data processing, converting the raw CTD and auxiliary sensor data (typically frequencies and voltages) to engineering units. Data Conversion uses the instrument configuration file, which defines sensors, sensor channels, and calibration coefficients, to convert raw data to engineering units. The conductivity was advanced approximately 0.073 seconds relative to pressure for CTD alignment. No low pass filter was applied to the data to reserve the high resolution signals. The practical salinity was calculated using DERIVE sal.cfg and the abslote salinity, density and potential temperature was calculated using DERIVE EOS80. The high resolution data are available both in ASCII format and matlab format. 1-m bin averaged files are created separately to generate the bin-averaged profiles and saved as matlab files. ERDDAP Subset 1 -89.18296 -89.18099 28.37538 28.375998 seconds 2016-09-20T06:48:40Z 2016-09-20T06:48:40Z -715.5 -525.5 tight ERDDAP_Subset https://erddap.griidc.org/erddap/tabledap/R5_x279_000_0004_tow_yo_7CTMDerive_EOS80_1m_bin_up.subset search Subset Web page to facilitate selecting subsets of the dataset download physicalMeasurement profile short tow_yo_7CTMDerive_EOS80_1m_bin time double Time time_elapsed_Up double Elapsed Time in Second sea_water_pressure_Up double Sea Water Pressure cast up sea_water_temperature_Up double Temperature cast up sea_water_temperature_2Up double Temperature 2 cast up sea_water_salinity_Up double Salinity cast up sea_water_salinity_2Up double Salinity 2 cast up dissolved_oxygen_Up double dissolved Oxygen cast up dissolved_oxygen_2_Up double dissolved Oxygen 2 cast up chlorophyll_concentration_Up double Chloropyhll_a concentration from fluorescence, WET Labs ECO-AFL/FL, cast up CDOM_Up double Raw Colored Dissolved Organic Matter (CDOM) concentration cast up beam_attenuation_Up double Beam Attenuation, Chelsea/Seatech cat up sea_water_absolute_salinity_01Up double absolute Salinity 1 cast up sea_water_absolute_salinity_02Up double absolute Salinity 2 cast up altimeter_Up double Altimeter cast up descent_rate_Up double Descent Rate cast up sea_water_potential_temperature_Up double potential temperature cast up sea_water_potential_temperature_2_Up double potential temperature 2 cast up qualityMaskUp double quality mask (0 = good; 1 = bad) qualityMask2Up double quality mask (0 = good; 1 = bad) platform char RV_Point_Sur instrument char Seabird 911plus CTD instrument1 char SEA-BIRD 917plus CTD instrument2 char Temperature sensor instrument3 char Conductivity sensor instrument4 char Pressure sensor instrument5 char Temperature sensor 2 instrument6 char Conductivity sensor 2 instrument7 char SPAR_Sensor instrument8 char Oxygen sensor instrument9 char Oxygen sensor 2 instrument11 char WET_LabsCStar instrument12 char FluoroWetlabCDOM_ instrument13 char Altimeter instrument14 char transmissometer crs int CRS Michael S. Williamson Texas A&M University-Corpus Christi +1 361-825-2048 HRI 213E Corpus Christi TX 78412 USA michael.williamson@tamucc.edu distributor OPeNDAP DAP/2.0 https://erddap.griidc.org/erddap/tabledap/R5_x279_000_0004_tow_yo_7CTMDerive_EOS80_1m_bin_up.html order Data Subset Form ERDDAP's version of the OPeNDAP .html web page for this dataset. Specify a subset of the dataset and download the data via OPeNDAP or in many different file types. download https://erddap.griidc.org/erddap/tabledap/R5_x279_000_0004_tow_yo_7CTMDerive_EOS80_1m_bin_up.graph order Make-A-Graph Form ERDDAP's Make-A-Graph .html web page for this dataset. Create an image with a map or graph of a subset of the data. mapDigital dataset 2020-12-14T10:04:19Z This record was created from dataset metadata by ERDDAP Version 2.02